Standby Generator Installation in Armonk, NY

Backup power in Armonk

Armonk is a hamlet in the Town of North Castle and the home of IBM's headquarters. It sits on hilly, forested ground in the southeast corner of the state, right on the Connecticut line, and the town's permits cover Armonk, Banksville and North White Plains.

Many Armonk houses are on larger, wooded lots set back from the road, much like Pound Ridge to the northeast. That means longer runs for gas or propane and wire, and more trees between the house and the utility lines.

In Armonk, as across northern Westchester County, a standby generator usually means a unit on a pad outside, a propane tank or natural gas supply, and an automatic transfer switch at the panel. HomeGuide puts a standard installation at about $6,000 to $11,000, and larger or more spread-out jobs at about $9,500 to $24,000. The home page cost table lists sources, including propane tank costs.

A site visit comes first. The installer looks at the panel, the fuel, any well pump, and where the generator and tank can go given clearances, slope and rock. Generator work needs a permit and inspection from your town or village, and the contractor should handle them.

Until a standby unit is in, keep any portable generator outdoors, far from windows and doors, and never in a garage or barn. Connect it only through a transfer switch or interlock installed by a licensed electrician.

When you send a request, mention your well, your current fuel and anything unusual about the property, such as a long driveway or outbuildings.

Nearby areas we also cover: Pound Ridge, Banksville, Valhalla.

Questions homeowners ask